RigCurrentBuild a rig

Minn Kota / verified motor profile

Endura C2 55: battery, breaker, and runtime setup

Published 50A maximum draw, 60A breaker guidance, and battery matches with enough BMS headroom.

Verified ledger

Maximum draw
50A
Breaker
60A
Shaft
36"
Source status
Reviewed
Open manufacturer source ↗
Model caveat

Check the manual for your exact model revision before using lithium or changing the factory cable length.

01

Compatible battery options

The filter keeps continuous BMS output at least 10% above published maximum draw. Capacity still depends on the trip.

02

Runtime planning table

These are planning ranges for a 100Ah LiFePO4 battery with reserve. They are not range or return guarantees.

Modeled runtime by use
Use patternModeled drawPlanning range
Positioning12.0A5.8–8.5h
Mixed fishing21.0A3.3–4.9h
Primary travel31.0A2.2–3.3h

03

Complete purchase checklist

  • 12V deep-cycle battery with adequate continuous BMS output
  • 60A manufacturer-specified protection
  • Battery-chemistry-compatible charger
  • Protected terminals and strain-relieved connectors
  • Marine cable sized from the exact extension-length table
Check current motor price ↗

Turn the guide into a rig

Use your actual motor and trip.

Open setup finder ↗